picogray/second to rad/second
Please provide values below to convert picogray/second [pGy/s] to rad/second [rd/s, rad/s], or change ↔.
picogray/second [pGy/s]
Definition: A unit of absorbed radiation dose rate equivalent to 1 picogray (10^-12 Gy) per second.
Historyandorigin: The prefix 'pico' represents a factor of 10^-12, used for ultra-low radiation dose rates.
CurrentUse: Used in precise scientific measurements, especially in space or astrophysical research.
funfact: Picograys are so small they’re mainly used in research environments focused on detecting cosmic or environmental radiation!
rad/second [rd/s, rad/s]
Definition: A non-SI unit of absorbed radiation dose rate equivalent to 0.01 gray per second.
Historyandorigin: The rad was used as the unit for absorbed radiation dose before being replaced by the gray in the SI system.
CurrentUse: Though no longer the standard in SI units, the rad is still encountered in some radiation protection contexts.
funfact: Rads were used for a long time before the adoption of the gray, and even today, the term 'rad' is still familiar in older literature!
picogray/second [pGy/s] to rad/second [rd/s, rad/s] Conversion Table
| 1 picogray/second [pGy/s] | 1.E-10 rad/second [rd/s, rad/s] |
| 2 picogray/second [pGy/s] | 2.E-10 rad/second [rd/s, rad/s] |
| 3 picogray/second [pGy/s] | 3.E-10 rad/second [rd/s, rad/s] |
| 5 picogray/second [pGy/s] | 5.E-10 rad/second [rd/s, rad/s] |
| 10 picogray/second [pGy/s] | 1.E-9 rad/second [rd/s, rad/s] |
| 50 picogray/second [pGy/s] | 5.E-9 rad/second [rd/s, rad/s] |
| 100 picogray/second [pGy/s] | 1.E-8 rad/second [rd/s, rad/s] |
| 1000 picogray/second [pGy/s] | 1.E-7 rad/second [rd/s, rad/s] |
| 10000 picogray/second [pGy/s] | 0.000001 rad/second [rd/s, rad/s] |
| 100000 picogray/second [pGy/s] | 0.00001 rad/second [rd/s, rad/s] |
| 1000000 picogray/second [pGy/s] | 0.0001 rad/second [rd/s, rad/s] |
How to Convert picogray/second to rad/second
1 picogray/second [pGy/s] = 1.E-10 rad/second [rd/s, rad/s]
1 rad/second [rd/s, rad/s] = 10000000000 picogray/second [pGy/s]
we use cross multiplication method
picogray/second [pGy/s] → rad/second [rd/s, rad/s]
1 → 1.E-10
1.5 → ?( suppose x)
=>1.5*1.E-10=1*x
by simplifying
x=1.5E-10